Maintenance of vacuum packaging machine
日期：2014-01-15 作者： 瀏覽：
1, vacuum packaging machine should be at a temperature of -10 ℃ - 50 ℃, relative humidity of not more than 85%, non corrosive gas in the air, no dust, no explosive dangerous environment. Like packing machine and shrink machine, the vacuum packaging machine for three-phase 380V power supply.
2, for the vacuum packaging machine to ensure the normal operation of vacuum pump, vacuum pump motor does not allow inversion. Should always check the oil level, the normal level of 1/2-3/4 oil window (no more than), when the vacuum pump in water or oil color black, you should replace the new oil (usually work for a replacement, one or two months for 1# vacuum gasoline or 30# gasoline, oil can also be).
3, impurity filter should often wash (generally 1-2 months cleaning a, such as packaging of fragmented objects should shorten the cleaning time)
4, work continuously for 2-3 months should open the rear cover of 30 sliding parts and switch blocks add lubricating oil, the heating rod connecting activities should be depending on the use of lubrication.
5, the decompression, filter, oil mist triplet 24 should always check, ensure that the oil mist, oil cup oil (sewing machine oil filter bowl), anhydrous.
6, heating, silica gel to keep clean, not stuck with a foreign body, so as not to affect the quality of sealing.
7, heating rods, two adhesive paste heating slice of the insulation effect, when the damaged should be replaced promptly, so as to avoid short circuit.
Working gas source and gas source for 8, user, machine working pressure vacuum packaging has been set to 0.3MPa, more appropriate, no special circumstances do not adjust too large.
9, vacuum packaging machine is not allowed to tilt and impact in the process of handling, but not down handling.
10, vacuum packaging machine must be reliable grounding device when installed.
11, it is strictly prohibited to hand in a heating rod, to prevent injury, the event of an emergency, immediately cut off the power supply.
12, when the first after ventilation, electricity, stop when the first power cut-off.
